Trotec T660 User Manual

3 Operating manual – Material moisture measuring device T660 EN
Scope of delivery
The scope of delivery includes:
• 1 x Material moisture measuring device T660
• 1 x USB cable
• 4 x Alkaline LR6 AA, 1.5 V batteries
• 1 x Display protection film
• 1 x Getting started guide
• 1 x Factory test certificate
Carefully read the operating manual before using the device
and keep it within reach!
• Do not use the device in atmospheres containing oil, sulphur,
chlorine or salt.
• Never use the device for measurements at live parts.
• Ensure that all connection cables are protected from damag-
es (e.g. from kinks or crushing).
• Protect the device from permanent direct sunlight.
• Observe the storage and operating conditions (see chapter
Technical data).
Intended use
Only use the material moisture measuring device T660 for the
moisture measurement of building materials.
Here, read and observe the technical data.
To use the device for its intended use, only connect and use
accessories and spare parts which have been approved by
TROTEC
®
.
Improper use
Do not use the device in potentially explosive atmospheres, or for
measurements in liquids. TROTEC
®
accepts no liability for dam-
ages resulting from improper use. In such a case, entitlements to
a warranty are forfeited. Any unauthorised modifications, altera-
tions or structural changes to the device are forbidden.
Personnel qualifications
People who use this device must:
• have read and understood the operating manual, especially
the Safety chapter.
For maintenance or repair work which requires the housing
to be opened, contact TROTEC
®
customer service. Devices
which have been opened unlawfully are void of any warranty
and warranty claims.
Residual risks
Danger!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Danger!
The device is not a toy and does not belong in the hands
of children.
Danger!
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way.
Observe the personnel qualifications.
Caution!
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Caution!
Do not use abrasive cleaners or solvents to clean the
device.
Technical data
Parameter Value
Model T660
Dimensions (L x W x H) 209 mm x 63 mm x 35 mm
Weight incl. batteries approx. 300 g
Measuring range 0 to 200 digits
Operating range
Operating temperature 0 °C to +50 °C
Relative humidity
<90% or <20g/m
3
(non-condensing)
Storage
Relative humidity < 95 % (non-condensing)
Ambient temperature -20 °C to +60 °C
Energy
Battery 4 x Alkaline LR6 AA, 1.5 V batteries
comparable NiMH rechargeable batteries
(>2500 mAh)
Current consumption, active approx. 80 mA
Current consumption, passive approx. 70 μA
Battery life at least 30 h
Safety

Trotec T660 Specifications

General

Penetration Depth	Up to 40 mm
Operating Temperature	0 °C to +50 °C
Measurement Range	0 to 200 digit
Resolution	0.1 digit
Display	LCD