Trotec TA400 - Information about the Device

3 EN
Operating manual – dynamic pressure anemometer TA400
Information about the device
Device description
The device can measure the following parameters:
• Air pressure
– PSI
– mbar
– inH
2
O
– mmH
2
O
– Pa
• Air velocity
– metres per second (m/s)
– feet per minute (ft/min)
– kilometres per hour (km/h)
– miles per hour (mph)
– nautical miles per hour in knots (kn)
• Air volume flow
– CFM (cubic feet per minute)
– CMM (cubic metres per minute)
• Air temperature
– degrees Celsius
– degrees Fahrenheit
The device is equipped with a HOLD function as well as with a
Max/Min value display.
Optionally, it also possible to read and save measurement data
directly on a PC by means of the software included in the scope
of delivery.
Device depiction
Setup
Unit
Unit
SAVE
CLEAR
Avg
Rec
HOLD
ZERO
MAX
MIN
P/V/F
1
2
3
4
5
6
7
8
9
10
15
14
13
12
11
No. Designation
1 Temperature sensor
2 Tripod thread
3 Battery compartment
4
+ input
5 Display
6 AVG/REC button
7
Unit button
8 SAVE/CLEAR button
9 HOLD/ZERO button
10 Power button
11 P/V/F button
12 MAX/MIN button
13
Unit button
14 Setup / illumination button
15
- input