EN 5
electric heater TDS 20 R / TDS 30 R / TDS 50 R
Overheating protection
The device is provided with a safety thermostat, which is
activated by overheating of the device. In such an event the
device switches off automatically.
When the safety thermostat is activated, allow the device to cool
down. Only then start to look for the cause of overheating.
Should the problem persist, please contact the customer
service.
Information about the device
Device description
The electric heater serves to generate and distribute warm air,
e.g. in interior spaces.
The device generates heat by means of a heating element.
The air surrounding the heating element is heated. The heated
air is blown into the room by a fan.
The device is equipped with an integrated thermostat and so
generates a constant flow of warm air.
The devices TDS 30 R and TDS 50 R are equipped with a time-
delay thermostat. It automatically regulates the device's
rundown operation.
Fan operation without heating function is also possible.
To Next Page
Loading...
Need help?
General
