EasyManuals Logo

Trotec TFC 19 E User Manual

Trotec TFC 19 E
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8 EN
fan heater TFC 19 E / TFC 20 E
Switching the device on
Once you have completely installed the device as described in
the chapter Assembly and start-up, you can switch it on.
Info
The device will not be switched on until the room
temperature falls below the temperature set at the
room thermostat.
Setting the heating level
Info
Choose the smaller power stage e.g. for a smaller
room. Should it turn out to be insufficient, switch to the
higher level.
1. Set the function selector switch(1) to I.
ð The operating light(3) is illuminated.
ð The device operates at heating level1.
2. In order to achieve the maximum heating performance, set
the function selector switch(1) to positionII.
ð The device operates at heating level2.
Setting the room thermostat
1. Select the desired temperature via the stepless rotary
switch(2) of the room thermostat.
minimum maximum
To find the ideal thermostat setting, please proceed as follows:
1. Set the thermostat control to maximum.
2. As soon as the desired temperature has been reached,
slowly turn the thermostat control back until the device is
switched off.
3. The operating light goes out.
ð The device now automatically maintains the desired
temperature level.
The room thermostat controls the room temperature
automatically:
When the set value is exceeded, the heating switches off.
When the set value is fallen below, the heating
automatically switches back on.
Info
The desired room temperature should be higher than
the current room temperature.
Using the oscillation function
By means of the oscillation function you can achieve consistent
heating.
TFC 19 E
1. Set the function selector switch(1) to either or .
ð The oscillation function is activated.
ð The device operates at heating level1 or 2.
ð The device turns to and fro by up to 70°.
1
TFC 20 E
1. Set the function selector switch(1) to either or
.
ð The oscillation function is activated.
ð The device operates at heating level1 or 2.
ð The device turns to and fro by up to 80°.
1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Trotec TFC 19 E and is the answer not in the manual?

Trotec TFC 19 E Specifications

General IconGeneral
BrandTrotec
ModelTFC 19 E
CategoryHeater
LanguageEnglish

Related product manuals