Trotec TWP 4036 E - Maintenance

14 EN
submerged waste water pump TWP 4036 E / TWP 7536 E / TWP 9000 ES / TWP 11000 ES
Maintenance
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
• Switch the device off.
• Hold onto the mains plug while pulling the power cable out
of the mains socket.
Notes on maintenance
Inside the device, there are no parts that need to be maintained
or lubricated by the user.
Safety signs and labels on the device
Check the safety signs and labels attached to the device at
regular intervals. Replace illegible safety signs!
Cleaning
• Clean the device with a soft, damp and lint-free cloth.
Protect electrical components from moisture. Do not use
any aggressive cleaning agents such as cleaning sprays,
solvents, alcohol-based or abrasive cleaners to dampen
the cloth.
• Disconnect the connection line.
• Rinse the filter connection adapter with clear water.
• In case of heavy soiling, also remove the cover plate from
the pump foot.
• Rinse the intake opening with clear water.
TWP 4036 E / TWP 7536 E
TWP 9000 ES / TWP 11000 ES
• If necessary, mount the cover panel to the pump foot.