Need help?Do you have a question about the Trotec TGP 1025 E and is the answer not in the manual?
General safety guidelines for operation and handling of the device.
Warnings related to electrical hazards, connections, and protection measures.
Warnings for user protection, especially regarding children and untrained users.
Safety instructions specific to garden pump operation and environmental conditions.
Defines the proper applications and pumping media for the garden pump.
Lists prohibited uses and unsuitable pumping media to avoid damage.
Specifies the required knowledge and awareness for users operating the device.
Explains the importance and meaning of safety signs and labels on the device.
Highlights potential dangers that remain even after following instructions.
Outlines steps to take in case of an emergency or malfunction.
Describes the device's thermal protection circuit and its function.
Overview of the TGP 1025 E garden pump's function and capabilities.
Illustrated diagram of the device with numbered parts and their designations.
Instructions for safely moving the device, including plug handling.
Recommended conditions for storing the device when not in use to prevent damage.
Lists the items included in the product packaging.
Steps for safely removing the device and packaging.
Guides users through initial setup, positioning, and connections.
Advice on selecting a suitable and safe location for the device.
Instructions for connecting pressure and suction lines to the device.
Detailed steps for attaching the pressure line, including seal tape use.
Instructions for connecting the suction line, including check valve requirements.
Steps to properly fill the pump with water before initial operation.
Procedure to remove air from the pressure line before starting.
Instructions for powering on the garden pump and its automatic operation.
Steps for safely turning off the garden pump.
Lists common problems and their solutions for the garden pump.
Troubleshooting steps for when the pump fails to turn on.
Troubleshooting steps for when the pump runs but doesn't draw water.
Safety precautions and steps to take before performing maintenance.
Information regarding user-maintainable parts and frost protection.
Procedure to check and adjust the air pressure in the pressure tank.
Specifications and performance data for the TGP 1025 E garden pump.
Reminder to check and maintain the legibility of safety signs.
Instructions for cleaning the device safely and effectively.
Guidelines for environmentally friendly disposal of the electrical equipment.
Statement of compliance with EC Machinery Directive and harmonised standards.
Contact information for Trotec GmbH & Co. KG and technical documentation.
Information on product model, type, and year of manufacture.
List of relevant EU directives and applied harmonised standards.
General| Max Head | 10 m |
|---|---|
| Max Immersion Depth | 7 m |
| Water Temperature Max | 35 °C |
| Protection Type | IPX8 |
| Supply Voltage | 230 V |
| Frequency | 50 Hz |
| Cable Length | 10 m |
| Inlet/Outlet Diameter | 1" |
| Power | 1100 W |
| Pump Connection | 1" BSP |
| Connection | 1" BSP |
To Next Page
