EasyManua.ls Logo

Trotec TWP 4006 E - User Manual

Trotec TWP 4006 E
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TRT-BA-TWP4006E-TWP7506E-TC2020-49-001-EN
TWP 4006 E / TWP 7506 E
EN
OPERATING MANUAL
SUBMERGED CLEAR WATER
PUMP, NEAR-GROUND
SUCTION
Question and Answer IconNeed help?

Do you have a question about the Trotec TWP 4006 E and is the answer not in the manual?

Summary

General Information

Notes Regarding Operating Manual

Information about the structure and content of the manual.

Safety Symbols Explained

Explains warning symbols used throughout the manual.

Safety Instructions

General Safety

Essential safety precautions for operating the device.

Electrical Safety

Specific warnings and requirements for electrical safety.

Personal Safety

Safety guidelines related to user and bystander protection.

Device-Specific Safety

Safety warnings pertinent to submerged pump operation.

Intended Use

Suitable Media and Applications

Defines suitable media and scenarios for pump operation.

Improper Use

Prohibited Applications

Lists uses and media that must be avoided to prevent damage or hazards.

Personnel Qualifications

User Requirements

Outlines necessary user knowledge and awareness for safe operation.

Safety Signs and Labels

Device Markings

Explains the safety signs affixed to the device.

Residual Risks

Behaviour in the Event of an Emergency

Overheating Protection

Information about the Device

Device Description

Overview of the submerged clear water pump's features and capabilities.

Device Depiction

Accessories

Connection Options

Transport and Storage

Transport Guidelines

Instructions for safely transporting the device.

Storage Conditions

Recommendations for storing the device when not in use.

Assembly and Installation

Scope of Delivery

Lists all components included with the submerged clear water pump.

Unpacking the Device

Steps for safely removing the device from its packaging.

Start-up

Guides for initial setup and connecting hoses or pipes.

Hose Line Without Thread

Installing the Connection System

Pipe Connection or Hose Connection with Internal Thread

Adjusting the Float Switch

Switching Point Settings

Details the water levels for automatic switch-on and switch-off.

Float Switch Adjustment

Guidance on positioning the float switch for optimal operation.

Positioning the Device

Operation

Switching the Device On

Instructions for powering on the submerged clear water pump.

Manual Operation

Shutdown

Errors and Faults

Device Does Not Start

Troubleshooting steps for when the pump fails to start.

Device Running, Not Pumping Water

Diagnosing issues when the pump runs but moves no water.

Device Not Switching Off Automatically

Troubleshooting float switch issues for automatic shutoff.

Device Switches Off After Brief Runtime

Diagnosing premature pump shutdown due to overheating or faults.

Insufficient or Decreasing Conveying Capacity

Troubleshooting reduced water flow rate.

Connection System Issues

Resolving problems with opening or closing the connection system.

Maintenance

Activities Required Before Maintenance

Safety steps to perform before starting any maintenance.

Notes on Maintenance

Information regarding user-serviceable parts within the device.

Cleaning

Instructions for cleaning the pump and its components.

Technical Annex

Technical Data

Specifications and parameters for TWP 4006 E and TWP 7506 E pumps.

Schematic Representation

Performance Chart

Disposal

Trotec TWP 4006 E Specifications

General IconGeneral
Power400 W
Max Head6 m
Suction Height7 m
Max. immersion depth7 m
Grain size5 mm
Water temperature35 °C
Protection typeIPX8
Supply voltage230 V
Cable length10 m
Pump typeSubmersible pump
Voltage230 V
Frequency50 Hz
Hose Connection1"

Related product manuals