What to do if Troy-Bilt 13A-130F063 engine turns over but won't start?
If your Troy-Bilt Lawn Mower's engine turns over but doesn't start, possible causes include a faulty ignition or spark plug(s), an empty fuel tank, a maladjusted or dirty carburetor, a plugged fuel line or filter, or bad fuel.
What to do if Troy-Bilt 13A-130F063 engine stalls after starting?
If your Troy-Bilt Lawn Mower engine starts but stalls after a few seconds, it could be due to a maladjusted or dirty carburetor, or bad fuel.
What to do if Troy-Bilt 13A-130F063 Lawn Mower engine does not turn over?
If your Troy-Bilt Lawn Mower engine doesn't turn over, the possible causes include a faulty attachment drive switch, faulty interlock switches or relays, a faulty battery or charging circuit, or the brake not being engaged.
Why does my Troy-Bilt 13A-130F063 engine overheat?
Your Troy-Bilt Lawn Mower engine might overheat due to dirty engine cooling fins or a flywheel screen, an improper oil level, or a loose engine. If the engine is loose, consider tightening it.
Why Troy-Bilt 13A-130F063 brake will not stop tractor?
If the brake on your Troy-Bilt Lawn Mower won't stop the tractor or hold it in park, the brake might be out of adjustment.
Why is the Troy-Bilt 13A-130F063 attachment drive inoperative?
If the attachment drive on your Troy-Bilt Lawn Mower is inoperative, a possible cause is a faulty attachment drive switch. Consider checking and replacing the switch.
General| Deck Material | Steel |
|---|---|
| Cutting Positions | 6 |
| Oil Capacity | 20 oz |
| Weight | 80 lbs |
| Warranty | 2-year limited |
| Engine | Briggs & Stratton |
| Cutting Width | 21 inches |
| Drive Type | Self-propelled |
| Cutting Height | 1.25-3.75 inches |
| Engine Displacement | 140cc |
Contact local dealer for unit service, providing model/serial numbers.
Details on obtaining warranty service through an authorized local dealer.
Guidance on contacting authorized engine dealers for engine service.
Prompting users to record unit identification numbers for service reference.
Reading manuals, preparing for operation, and general safety introduction.
Safety rules for handling gasoline and general tractor operation.
Safety related to children, slopes, stopping the unit, and maintenance.
Safety precautions for engine, battery, and unit storage.
List of available mower deck attachments for the tractor.
Available grass collection attachments and their compatibility.
List of snow removal attachments like snowthrowers and blades.
Attachments like wheel weights, tiller, cart, cab, and electrical kits.
Identifies the location and provides descriptions for safety decals on the unit.
Details of instrument panels for models 130F and 145F.
Explanation of ignition switch, choke, and throttle levers.
Operation of travel pedals, gear shift, brake, and attachment lift.
Function of steering wheel, fuel level, and attachment height indicators.
Essential checks before operating, including engine oil and fuel.
Maintenance of flywheel screen, seat adjustment, fuel tank, and tire pressure.
Step-by-step instructions for safely starting the engine on the tractor.
Procedures for engine warm-up, stopping, and testing the safety interlock system.
How to operate hydrostatic/gear drive systems and move the unit manually.
Procedures to check brake and steering functionality before operation.
Explains how to use the attachment lift lever for adjusting implement height.
Instructions for attaching the chute deflector to the mower deck.
Procedures for adjusting deck side-to-side and front-to-rear leveling.
How to set the mower deck's cutting height using the lift handle.
Step-by-step guide for removing and installing the mower deck.
Maintenance for cleaning the deck underside and caring for mower blades.
Covers lubrication, drive belt replacement, and best practices for mowing.
Instructions for removing and installing the tractor hood.
Information on engine service, oil level checks, and oil changes.
Procedures for replacing the oil filter, cleaning the flywheel screen, and changing the fuel filter.
Maintenance for the air cleaner, carburetor, and battery.
Covers spark plug service, fuse replacement, and fender removal/installation.
Adjusting brakes, interlock switch, and mower height indicator for proper operation.
Adjusting gear shift linkage and performing hydrostatic transmission maintenance.
Routing and installing drive belts for gear and hydrostatic drive units.
Guidelines for preparing the unit for storage, including fuel, battery, and cleaning.
Technical details including dimensions, engine, transaxle, and tire sizes.
To Next Page