To Next Page
O
osmithJul 26, 2025
Why does my Troy-Bilt Pressure Washer have no pressure?
- Mmarvin23Jul 26, 2025
If your Troy-Bilt Pressure Washer pump fails to produce pressure, exhibits erratic pressure, chatters, loses pressure, or has low water volume, here's what you can do: * Ensure the nozzle is not in low pressure mode; pull it backward for high pressure. * Check for and clear any blockage in the water inlet. * Make sure the water supply is adequate. * Inspect the inlet hose for kinks or leaks; straighten the hose or patch any leaks. * Examine and clean the inlet hose strainer if it's clogged. * Ensure the water supply temperature is not over 100°F; use a cooler water supply. * Clear any blockages in the high pressure hose. * If the gun leaks, replace it. * Clean the nozzle if it's obstructed. * If the pump is faulty, contact an authorized service facility.
General
