Troy-Bilt 830 Series User Manual (English)

To Next Page

Safety • Assembly • Operation • Tips & Techniques • Maintenance • Troubleshooting • Parts Lists • Warranty

Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-

covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).

If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law

(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester

for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland,

Ohio 44136-0019.

PRINTED IN U.S.A

READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION

IMPORTANT

OPERATOR’S MANUAL

21-inch Rotary Mower — Model Series 830

TROY-BILT LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

*Shown with Optional Electric Start

4/26/2007

FORM NO. 769-02163B

Need help?

Do you have a question about the Troy-Bilt 830 Series and is the answer not in the manual?

Troy-Bilt 830 Series Specifications

General

Engine	Briggs & Stratton
Engine Displacement	190cc
Cutting Width	21 in
Deck Material	Steel
Number of Cutting Positions	6
Mulching Capability	Yes
Side Discharge	Yes
Rear Bag	Yes
Self-Propelled	Yes
Start Type	Recoil
Cutting Height	1.25 - 3.75 in
Engine Type	Gasoline
Fuel Tank Capacity	0.5 gallons