Name: Troy-Bilt Pro-Line CRT
Brand: Troy-Bilt
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Troy-Bilt Small Frame Tillers

7.42. Drive the wheel shaft to the left, forcing the

bronze wheel shaft bushing out of the transmis-

sion housing using a block of wood and a large

hammer. See Figure 7.42.

NOTE: The inner spacer will be damaged by the

Hi-Pro key.

7.43. Remove the bronze bushing and spacer from

the right side of the wheel shaft.

NOTE: The lubrication cut a ways on the bronze

bushing face in during assembly.

7.44. Grasp the wheel shaft worm gear with one hand,

and remove the wheel shaft with the other.

NOTE: Make certain the wheel shaft worm gear

does not drop to the bottom of the transmission

housing.

7.45. Remove the Hi-Pro key from the wheel shaft

using a punch and a hammer. See Figure 7.45.

7.46. Inspect the wheel shaft assembly components

for wear or damage. See Figure 7.46.

Figure 7.42

Wheel Shaft Worm Gear

2” x 4”

Hammer

Bronze Bushing

Spacer

Hi-Pro Key

Figure 7.45

Wheel Shaft

Hi-Pro Key

Figure 7.46

Wheel Shaft Worm Gear

Hi-Pro Key

Wheel Shaft

Oil Seals

Retaining Rings

Bronze Bushings

External Shims

Internal Shims

Troy-Bilt Pro-Line CRT Service Manual

Other manuals for Troy-Bilt Pro-Line CRT