Troy-Bilt TB272V User Manual

769-21790 / 00 05/19
TB272V
2-Cycle Handheld Blower / Vacuum
Operator’s Manual
IMPORTANT: Read this manual thoroughly before using this product. Follow all instructions.
SAVE THESE INSTRUCTIONS

Troy-Bilt TB272V Specifications

General

Engine Type	2-Cycle
Air Speed	150 mph
Air Volume	400 cfm
Fuel Capacity	13.5 fl. oz.
Starting System	Recoil
Type	Handheld
Power Source	Gasoline

Summary

Service Information

Safety Overview

Spark Arrestor Requirements

Note detailing spark arrestor compliance for U.S. Forest Land and specific states.

Gasoline Unit Safety Precautions

Safe Unit Operation Practices

Maintenance and General Safety

Blower and Vacuum Safety

Specific safety guidelines applicable when using the unit in blower or vacuum modes.

Additional Safety Guidelines

Further safety warnings and recommendations for unit operation and proper storage.

Safety Symbols and Identification

General Safety Alerts

Definitions for general safety alert symbols, manual references, and personal protective equipment warnings.

Fuel and Maintenance Symbols

Explanation of symbols pertaining to fuel types, oil usage, and maintenance indicators.

Hazard and Operation Symbols

Definitions of symbols indicating specific hazards like thrown objects, hot surfaces, and rotating components.

Unit Familiarization

Unit Applications

Description of the various tasks and purposes for which the blower/vacuum unit is designed.

Required Assembly Tools

List of tools that are necessary for the proper assembly of the unit.

Technical Specifications

Key technical details and performance metrics of the Troy-Bilt blower/vacuum unit.

Unit Assembly Procedures

Blower Configuration Assembly

Step-by-step instructions for attaching the blower tubes to the unit.

Vacuum Configuration Assembly

Vacuum Bag Installation and Use

Fuel and Oil Best Practices

Fueling the Unit Safely

Step-by-step instructions for performing safe and correct fueling of the unit's fuel tank.

Engine Starting and Stopping

Engine Starting Sequence

A comprehensive step-by-step guide for successfully starting the blower/vacuum engine.

Engine Stopping Procedure

The correct method for safely shutting down the unit's operational engine.

Unit Operation Guide

Proper Unit Handling

Guidance on maintaining a correct grip and stable stance for blower operation.

Operation Efficiency Tips

Recommendations for optimizing performance and achieving effective debris cleanup.

Vacuum Operation and Bag Management

Emptying the Vacuum Bag

Step-by-step process for safely removing and emptying collected debris from the vacuum bag.

Routine Maintenance

Maintenance Task Schedule

Recommended frequencies for completing key maintenance activities for optimal performance.

Air Filter Maintenance

Instructions for cleaning, re-oiling, and properly reinstalling the unit's air filter.

Engine and Spark Plug Maintenance

Idle Speed Adjustment

Guidance on how to adjust the engine's idle speed for smooth and correct operation.

Spark Plug Servicing

Steps for inspecting, cleaning, gapping, and replacing the spark plug for engine health.

Cleaning and Storage Procedures

Unit Exterior Cleaning

Methods and precautions for cleaning the outside surfaces of the unit.

Unit Storage Guidelines

Recommendations for safely storing the unit, including specific instructions for long-term storage.

Troubleshooting Common Issues

Engine Failure to Start

Diagnostic steps and solutions for addressing issues preventing the engine from starting.

Engine Improper Idling

Troubleshooting tips for resolving problems related to the engine's idling performance.

Engine Acceleration Problems

Solutions for issues that prevent the engine from accelerating correctly.

Engine Power Loss or Stalling

Troubleshooting steps for addressing scenarios where the engine loses power or stalls during operation.

Troy-Bilt Limited Warranty

Obtaining Service and Support

Instructions for locating authorized service dealers and initiating warranty claims.

Warranty Limitations and Exclusions

Information on conditions, parts, and circumstances not covered by the product's limited warranty.