Why Troy-Bilt Blower engine will not start?
- AAmy NorrisJul 29, 2025
If your Troy-Bilt Blower engine won't start, several factors could be at play. First, ensure the fuel tank isn't empty; if it is, fill it with properly-mixed fuel. If the primer bulb wasn't pressed enough, try pressing it 10 times. Alternatively, the engine might be flooded; in that case, squeeze the throttle control and pull the starter rope until the engine starts. Old or improperly mixed fuel (over 30 days) can also be a culprit; drain the fuel tank and add fresh, properly-mixed fuel. A fouled spark plug may also be the reason, so replace it. Finally, make sure the choke lever was flipped according to the Starting Instructions.