Need help?Do you have a question about the Tru-Test EC-10 and is the answer not in the manual?
General| Brand | Tru-Test |
|---|---|
| Model | EC-10 |
| Category | Measuring Instruments |
| Language | English |
Safety precautions for using the plate meter, including electric fences and storage.
Description of the heavy-duty plastic plate for measuring pasture height and density.
Details the grooved rod for measurement and the electronic meter assembly.
Explains the adjustable black handle for user comfort and operation.
Instructions on how to power the plate meter on and off using the back switch.
Explanation of the functions of the four buttons on the meter's front panel.
Instructions on how to load the default formula into the plate meter.
Formulas derived to reflect different pasture growth stages and seasons.
Month-based equations developed by Dairy NZ for pasture measurement.
How to place the meter on the ground and record readings for grass height.
Guidance on frequency, consistency, and methodology for pasture walks.
Detailed step-by-step instructions for recording pasture measurements in paddocks.
Feature to reverse the last reading in case of error during data collection.
Formula for calculating total dry matter based on paddock area.
Formula to determine pasture growth rate between samples.
Steps to connect the EC10 plate meter to a computer for data transfer.
Procedure for importing farm walk data from the plate meter into the software.
Checks to perform on the plate meter before starting a pasture measurement session.
Cleaning and storage instructions for the plate meter after use.
Guide on how to replace the 9V battery in the plate meter.
Troubleshooting steps for when the plate meter screen shows no display.
Diagnosing and resolving issues with the meter beeping and shutting down.
Checks and resolutions for a dislodged cog affecting meter operation.
Troubleshooting steps for a damaged potentiometer impacting meter function.
Checking for issues with the metal shaft impacting free movement.
Diagnosing why the plate meter fails to beep during readings.
Ensuring the meter's counter provides accurate readings under normal conditions.
Guidance on selecting and verifying pasture cover equations for accurate results.
Troubleshooting for a bent metal shaft affecting the plate meter's movement.
Instructions for cleaning grass or soil build-up from the meter's case.
Cleaning flutes on the steel shaft to ensure proper operation.
Troubleshooting for unresponsive buttons on the plate meter's front panel.
Procedure to select the pre-programmed default formula on the plate meter.
To Next Page
