Tru-Test MP600 - User Manual

MP Series Load Bars Quickstart Guide
1
This guide takes you through the installation and use of your MP series load bars. The Multi Purpose (MP) load bar series
are designed for a variety of applications, for example, with platforms, small animal crates or wool presses. They are
portable and can be transported easily from site to site.
1
Unpacking the box
The MP series comprises a set of two matching load bars.
Each bar is supplied with two M10 bolts for mounting the platform or crate. Anchor bolts are not supplied.
2
Weighing system
The Tru Test weighing system consists of a weigh scale indicator and one or more load bars. The load bars are fitted
beneath a platform or crate and transmit the weight signal to the indicator. The indicator displays and records the weight.
QUICKSTART GUIDE

Summary

Unpacking MP Load Bars

Weighing System Setup

Load Bar Identification

Installing MP Load Bars

Testing the Weighing System

Troubleshooting Load Bar Issues

Reading Accuracy and Zero Issues

Addresses issues with readings not returning to zero, differences between ends, or under-reading.

Unstable Reading Correction

Solutions for when the weight reading is unstable during use.

Load;Overload Display Movement

Troubleshooting unstable readings or display changes under load or overload.

Maintenance and Care Guidelines

Product Disposal Instructions

Warranty and Servicing Information

Tru-Test MP600 Specifications

General

Operating temperature	-10°C to +50°C
Ingress Protection	IP67
Weight Capacity	600 kg
Display	LCD
Power Supply	Rechargeable Battery
Communication	Bluetooth, USB
Environmental Protection	Dust and water resistant