Tru-Test Series 2000 User Manual

OFF
ON
C
E
RE C OR D ED
HO L D
LIVE
MAX
AUTO
ZERO
MIN
FINE
MODE
TO TAL
COUNT
AV E R A G E
CLEAR
STATS
HOLD
WEIG HT
ZERO
RECORD
ESCAPE
UNDO
RECOR D
PO W ER
LO AD C EL L S
INSTALLATION
Your Tru-Test indicator is supplied fully
installed and calibrated for your
Giltrap silage wagon. The internal
battery is charged and ready to use,
or you may wish to connect the
power cable semi-permanently by
installing a plug at the back of your
tractor.
CongratulationsifyouhavepurchasedthisTru-TestSeries2000scaleIndicatorwithyourGiltrapsilage
wagon.Toensureyoureceivemaximumbenefitfromowningaweighingsystem,pleasepaycareful
attentiontothefollowinginstructions.
USERGUIDE
Power connector for connecting 12 V vehicle battery (red clip to positive
terminal) or Tru-Test power adaptor. Connection to a 12V vehicle battery will
charge the internal battery in the indicator.
BASICWEIGHING
1 Press and wait for display.
2 Load the silage wagon with the first feed product.
3 Wait for stable light .
4 Note the weight before continuing to load, or commence
feeding out when the wagon is loaded satisfactorily.


CE
Loadcell connectors.
Use either connection
for the silage wagon
load cells.
Dust caps screw together
to keep out dirt and
moisture when cables
are connected to
Indicator. Screw back
on Indicator/cables
when cables removed.
®
ON

Tru-Test Series 2000 Specifications

General

Brand	Tru-Test
Model	Series 2000
Category	Accessories
Language	English