1
This guide takes you through your first use of the WOW2 (Walk Over Weighing,
generation 2) weigh scale indicator.
Contents
Unpacking the box .................................. 1
Getting around ........................................ 2
Installing ................................................. 3
Setting up the indicator ........................... 4
Recording information ............................. 4
Maintenance and servicing ...................... 5
Compliance ............................................. 6
For further information, view the reference
information on the supplied USB flash drive or
visit www.tru-test.com
Check that you have all of these items. If anything is missing, contact your supplier.
WOW2 weigh scale indicator
Serial adaptor
This cable is for connecting the
indicator to the EID panel reader
and for connection to a PC
together with the USB-DB9
adaptor and the serial cable.
Mains power adaptor
Power plugs for different regions
are included.
USB flash drive
The flash drive contains Data Link
software and reference
information.
To Next Page
Need help?
General
