Tru-Test WOW2 User Manual

4
4
Setting up the indicator
If required, you can localise the indicator.
Changing the indicator setup
To change the way the indicator is set up:
Press , scroll down to Setups and press .
Apply the following settings:
1. Set the Date and Time to today’s date and time.
2. Set Weight Units to kg.
3. Set Language to English.
5
Recording information
Depending on the way your WOW system has been set up, information may be
streamed directly to the third party management software, or it may be recorded to
the indicator and transferred to the software at set times. The procedure for weighing
animals remains the same, whichever method is used.
Weighing an animal
Ensure that the indicator is displaying 0.0. If not, press .
Allow animals to file over the platform.
Weights and EIDs will be captured automatically.
If the indicator is not displaying 0.0 between animals or there are problems
with inaccurate or unstable weights, make sure that the bars are firmly
secured to the concrete floor and free from stones or dirt and that the load
bars are properly connected to the indicator.

Tru-Test WOW2 Specifications

General

Brand	Tru-Test
Model	WOW2
Category	Accessories
Language	English