4
Recording EID tags (standalone)
You should start a new session file each time you begin a new scanning session.
1. Press
to switch on the stick reader.
2. On the Home screen, press
and select New Session.
3. Press
.
4. Press the Read button while holding the stick reader near to an EID tag.
When scanning EID tags, if animals are moving quickly through a race or into a
pen, you can hold down the Read button continuously. Scanning will stop when
the Read button is released.
Displaying VIDs (visual IDs) during scanning
EID/VID pairs can be transferred from the PC to the stick reader prior to scanning
using the Data Link PC software. This means that when an animal's EID tag is
scanned, the corresponding VID number will be displayed automatically.
To Next Page
Loading...
Need help?
General