Tru-Test SRS2 User Manual

5
5
Bluetooth
®
connection
The stick reader will automatically connect to any Tru-Test Bluetooth enabled
weigh scale indicator, or any other device, with which it has previously been paired
(when in BT Auto mode - default).
In order to manually establish a Bluetooth wireless connection (if you are using a
non-Tru-Test weigh scale indicator, or you are having trouble establishing a
Bluetooth wireless connection):
1. With both devices off, position the stick reader close to the other device.
2. Switch on the device and, if necessary, check that its Bluetooth setting
is enabled.
3. Switch on the stick reader.
4. Select Settings, then Bluetooth to display the Bluetooth Settings
screen.
5. Select Search for devices.
A list of available devices will be displayed.
6. Select a device.
Wait for up to one minute until the two devices are paired. When
pairing is complete, the Bluetooth indicator light above the
Read/Select button will illuminate blue.
7. Use the stick reader to scan an EID tag in order to test the connection.
Always turn on the device you are trying to pair with first, BEFORE the stick reader.

Tru-Test SRS2 Specifications

General

Brand	Tru-Test
Model	SRS2
Category	Scanner
Language	English