23
STEP 2—ROUTE CABLE THROUGH UPRIGHT AND MAIN FRAME ASSEMBLIES CONTINUED
98
c. Route the upright cable through the top of the upright assembly and around the pulleys.
d. Using an allen wrench and a socket wrench or open end wrench, reattach the upright pulleys using 2 hex screws, 4
fl at washers, and 2 lock nuts.
e. Using an allen wrench, reattach the main frame pulley using 1 hex screw and 1 lock washer.
12
13
10
11
8
To Next Page
Loading...
