............ www.truemfg.com ............
True Food Service Equipment, Inc.
8 8
INSTALLATION / OPERATION INSTRUCTIONS
A.
B.
C.
D.
NOTE
If the cooler is disconnected or shut off, wait five minutes
before starting again.
RECOMMENDATION
Before loading product we recommend you run your
TRUE unit empty for two to three days. This allows you to
be sure electrical wiring and installation are correct and
no shipping damage has occurred. Every TRUE cooler is
tested in our plants for 24 hours to thoroughly check all
components. Unless they meet our strict standards, they
do not pass our final quality control inspection. Remember,
our factory warranty does not cover product loss!
REPLACEMENT PARTS
TRUE maintains a record of the cabinet serial number for
your cooler. If at any time during the life of your cooler, a
part is needed, you may obtain this part by furnishing the
model number and serial number to the company from
whom you purchased the cooler.
STARTUP
SHELF INSTALLATION
To Next Page
Loading...
Need help?
General
