Need help?Do you have a question about the Truma B 14 and is the answer not in the manual?
Essential safety precautions for operating the gas and electric water heater, including handling gas cylinders and potential hazards.
Step-by-step guide on filling the water heater with water, ensuring all air is expelled.
Instructions for emptying the water heater, crucial for frost protection and maintenance.
Procedure for starting the water heater using gas, including checks and indicator lamp interpretation.
Instructions on how to safely turn off the water heater when using gas operation.
Explanation of the red indicator lamp and its meaning for identifying operational failures.
Details on operating the water heater using the 230/240 V electric element.
Guidance on routine maintenance and the location and type of fuses for the water heater.
Troubleshooting steps for gas, electrical, and water supply issues, with common symptoms and causes.
Details about the manufacturer, water contents, pressure, gas type, input, and heat output.
Information on heating up times for different operations and power consumption at 12 V and 230/240 V.
Physical dimensions of the unit and declarations of conformity with relevant standards.
Details on the 12-month warranty, service agent requirements, and product usage conditions.
List of conditions that void the warranty and important advice before calling a service technician.
Location of the data label and the intended applications for the water heater unit.
Guidelines on regulations, modifications, and the impact on warranty and legality.
Criteria and considerations for selecting an appropriate location for mounting the water heater.
Initial steps for installing the water heater, including positioning the cowl and drilling.
Detailed instructions for connecting the water heater to the water supply using supplied components.
Guide for installing elbow connectors with and without breather valves for water connections.
Instructions for installing the safety/pressure relief drain valve near the water heater.
Guidance on fitting the pressure reducer between the drain valve and water pump.
Recommendations for routing cold and hot water pipes for optimal function and servicing.
Instructions for connecting the gas supply to the boiler, including fittings and pressure checks.
Steps for drilling, mounting, and connecting the control panel for gas operation.
Procedure for connecting the 12 V power supply to the control electronics unit.
Instructions for connecting the 230/240 V heating element, requiring a licensed electrician.
Post-installation checks for gas supply, appliance function, and applying warning stickers.
List of optional accessories for the water heater, such as connectors, cowls, and extension cables.
To Next Page
General
