Need help?Do you have a question about the Truma BGE 10 and is the answer not in the manual?
General| Rated heat input | 10 kW |
|---|---|
| Water capacity | 10 liters |
| System pressure | 1.5 bar |
| Power output | 10 kW |
| Type of gas | Propane / Butane |
| Operating pressure | 30 mbar |
Defines approved applications and prohibits misuse in various vehicle types and locations.
Covers gas cylinder type, gas leaks, refuelling, burn hazards, child use, and technical requirements.
Addresses expert repairs, power connections, gas pressure, inspections, and material compatibility.
Details draining the boiler for frost protection and fitting the cowl cover when not in use.
Covers water filling even when not in use, pressure reduction, and initial start-up fumes.
Rinsing the water supply before first use and steps for filling the boiler with water.
Instructions for starting the boiler in gas mode and electrical mode (BGE 10).
Explains the red LED fault indicator and procedures to clear faults.
Details on switching off the boiler and draining it, especially for frost protection.
Recommendations for cleaning, maintenance, and information on the boiler's 12V fuse.
Lists common faults, their causes, and remedies for the gas operation mode.
Lists common faults, their causes, and remedies for the electrical operation mode (BGE 10).
Addresses problems like water dripping from the drain valve or backflow into the cold supply.
Defines warranty coverage, duration, consumer eligibility, and conditions for exclusion.
Details the procedure for claiming warranty, including contact information and required details.
To Next Page
