Truma Combi CP Plus Series - Page 2

“Simply Better”
truma.com/us
Find more
resources here
SET CLOCK TO CURRENT TIME
SET TIME SWITCH
Set a start time and end time for room
temperature, water temperature, energy mode
and fan speed set points.
SETTINGS
Index - Show version number of connected device
Bright - Adjust backlighting
Lang - Adjust language
12-24h - 12/24 hour mode
Temp - °F or °C
Oset - Calibrate temp oset
Reset - Factory reset
SELECT FAN SPEED
OFF - Fan is switched o
(If furnace mode OFF)
a) Vent - Circulating air (If furnace mode OFF)
b) Eco - Low fan speed
c) High - High fan speed
d) Boost - Fast room heating.
Available if the dierence between
the selected and current room
temperature is >18° F (10° C).
a b c d