Truma Combi CP Plus User Manual

Select energy mode
Truma Combi
®
Quick Reference
CP Plus Functions
Adjust room temperature - Range: 40-86°F (5-30°C)
a) LP gas
b) MIX 1* - Electricity 850W + Gas
c) MIX 2* - Electricity 1700W + Gas
d) EL* - Electricity 850W
e) EL* - Electricity 1700W
a) boiler – Hot water generator is on. Icon
flashes until desired temperature is reached.
b) eco – Water temperature is 104°F (40° C)
c) hot – Water temperature is 140°F (60° C)
d) boost – Boiler content is heated quickly
(boiler priority) for up to 40 minutes. The water
temperature is then kept at the higher level
(about 144° F (62° C) for two subsequent
heating cycles. When the water temperature is
reached, the room is heated again.
Adjust water temperature
*Truma Combi eco plus and comfort plus
only

Truma Combi CP Plus Specifications

General

Operating voltage	12 V DC
Current consumption (at 12 V)	max. 65 mA
Dimensions (L x W x H)	92 x 103 x 40 mm
Power Supply	12 V DC
Display	LCD
Compatibility	Truma Combi heaters
Mounting	Wall-mounted
Control Functions	fan control

Summary

CP Plus Functions Overview

Adjust Room Temperature

Allows adjustment of room temperature within a range of 40-86°F (5-30°C).

Select Energy Mode

Choose between LP gas, mixed modes (Electricity + Gas), or electric-only modes (850W or 1700W).

Adjust Water Temperature

Select water heating modes: boiler (heating), eco (104°F/40°C), hot (140°F/60°C), or boost (quick heating).

CP Plus Additional Functions

Set Clock and Time Switch

Set the current time and configure time switches for temperature, water, energy mode, and fan speed.

System Settings

Access settings for backlighting, language, time format (12/24h), temperature units (°F/°C), and factory reset.

Select Fan Speed

Choose fan speed: OFF, VENT (air circulation), ECO (low speed), HIGH (high speed), or BOOST (fast heating).