Truma E-Kit User Manual

EN Operating instructions
To be kept in the vehicle
Truma E-Kit
Page 02

Truma E-Kit Specifications

General

Type	Electric heater
Power output	2 kW
Voltage	230 V
Power Supply	230 V
Thermostat	Yes
Safety Features	Overheating protection

Summary

Proper Use

Safety Instructions

Symbols Used

Operating Instructions

Start-up

Remove cowl cover, open gas cylinder, establish power supply, and select mode/temperature.

Initial Start-up

Steps to perform initial start-up including power supply, system search, and panel initialization.

Operation

Details on how the Truma E-Kit is operated via the Truma CP plus VarioHeat control panel.

Electrical Operation (EL)

Using the Truma E-Kit for heating in electrical mode with warm air distribution via Vario Heat.

Mixed Mode (MIX)

Using the Truma E-Kit together with the Truma VarioHeat for combined heating.

Gas Mode (GAS)

Using only the Truma VarioHeat for heating in gas mode.

Technical Data