Truma Saphir compact Operating Instructions

4
Always observe the operating instructions and the
“Safety instructions” prior to starting! The vehicle owner
is responsible for correct operation of the appliance.
Remote control
The symbols in the display are visible depending on the
settings.
Sleep function
(in cooling mode only)
Ultra-quiet fan operation
by reducing the speed of both fans
Setup button
Tuning the remote control and
the IR receiver
Mode
Operating mode selection button
– Cooling
– Circulated air
Temperature selection buttons
16 – 31 °C
In 1 °C steps
On / O switch
Reset
Resets the remote control to
the factory settings
.
Fan level
– low
– medium
– high
Resend
Retransmit data
Time selection button
Timer ON
– unused
Time setting
Setting for clock time and timer
Timer OFF
Switch-o time can be set up to
24 hours in advance
Timer
Switch-o time
Cooling
Setup
Resend /
data transmission
Circulated air
Fan level
Sleep function
Temperature
Time
Fig. 2
Operating instructions
Operating instructions can be viewed in offline mode
with a mobile device and the Truma App. Download the
operating instructions when you have a WiFi connection and
save them on your mobile device.

Truma Saphir compact Specifications

General

Cooling Capacity	1800 W
Power Consumption	2.8 A
Weight	20 kg
Dimensions	560 x 400 x 290 mm
Operating Voltage	230 V
Noise Level	52 dB