Need help?Do you have a question about the Truma VarioHeat and is the answer not in the manual?
General| Type | Gas heater |
|---|---|
| Power supply | 12 V DC |
| Fuel type | Propane / Butane |
| Operating pressure | 30 mbar |
| Weight | 5.1 kg |
| Power consumption (12 V) | 1.1 A |
| Heat output | 1300 W / 2800 W / 3700 W |
Immediate actions for gas smell, dangers of toxic exhaust fumes in enclosed spaces.
Warnings against flammable materials, hot surfaces, and safe operation during refuelling.
Requirement to keep air inlets/outlets and surrounding areas clear of obstructions and flammable items.
Responsibilities, warning stickers, gas system inspections, pressure device replacement, and hose checks.
Proper gas phase usage, pressure matching, recommended regulators, and initial start-up ventilation for safety.
Conditions for use by children and persons with reduced capabilities, emphasizing supervision and instruction.
Procedures for initial fault identification, expert repairs, and self-repair limitations.
Control panel use for heating/AC systems, safety guidelines, and repair restrictions.
Common faults for the Truma VarioHeat heater, including flame recognition and sensor issues, with remedies.
Interpreting LED status (no lights, green only, red flashes) to identify faults on the analogue control panel.
Specific remedies for faults indicated by red LED flash codes (1x to 6x) on the analogue panel.
To Next Page
