Trumpf TruHeat HF 3000 Series User Manual

Operating instructions TruHeat HF Series 1000 / 3000 / 5000
A 05-0099-00.BEN-001-21
28.03.2017
Operating instructions
TruHeat HF
Series 1000 / 3000 / 5000
Notice!
This operating manual is required for the safe operation of the device.
Therefore, you should keep the operating manual close to the device.

Trumpf TruHeat HF 3000 Series Specifications

General

Brand	Trumpf
Model	TruHeat HF 3000 Series
Category	Industrial Equipment
Language	English

Summary

2 SAFETY

2.1 INTENDED USE

Defines the proper application and unauthorized operating methods for the generator.

2.2 GENERAL WARNING NOTICES

Covers dangers from high voltages, electromagnetic fields, and high temperatures.

2.3 DANGERS DURING MAINTENANCE AND REPAIR

Details hazards associated with maintenance and switched-off device states.

2.4 SAFETY DEVICES

Explains monitoring and protection devices ensuring safe operation.

2.5 EMERGENCY MEASURES

3 DESCRIPTION, TECHNOLOGY

3.3 TECHNOLOGY

3.5 OPERATION AND MATCHING

Covers principles of operation, load matching, frequency matching, and starting procedures.

5 INSTALLATION

5.3 INSTALLATION AND ASSEMBLY

5.4 CONNECTING

Detailed instructions for connecting the inductor, cooling water, mains, and control circuits.

6 OPERATION, CONTROL

6.1 SAFETY NOTES FOR OPERATION

Crucial safety warnings regarding voltages at the inductor and during inductor changes.

6.3 OPERATION VIA CONTROL MODULE

6.7 SET / ACTUAL VALUE DISPLAY

6.8 OPERATING PARAMETERS

Configuration of process-specific parameters and management of parameter sets.

6.10 GENERATOR SETUP

6.11 DIAGNOSIS

6.16 TROUBLESHOOTING, RECTIFICATION OF FAULTS

Guidance on interpreting and resolving fault and warning messages.

8 INTERFACES

8.2 ANALOG-DIGITAL INTERFACE

8.3 RS 232 SERVICE & 8.4 RS 232

8.5 PROFIBUS & 8.6 CANOPEN

8.7 PROFIBUS AND RS 232 COMMANDS

Lists and explains commands for Profibus and RS 232 communication.