Need help?Do you have a question about the Trumpf PFO 33 and is the answer not in the manual?
General| Brand | Trumpf |
|---|---|
| Model | PFO 33 |
| Category | Industrial Equipment |
| Language | English |
Provides important hints for the safe operation of the laser product.
Explains the structure and meaning of warning instructions.
Defines key terms related to laser products and components.
Overview of possible hazards that might be caused by your laser product.
Covers laser beam emission openings, emergency stop, and warning signs.
Details technical and organizational measures for safe user operation.
Details on how to integrate the PFO into a larger system.
Information on electrical insulation and resistance measurement.
Overview of connections and installation steps for the PFO.
Explains the real-time start function and its interface.
Specifies operating temperature, humidity, and protection type.
Describes the modular design and available variants and accessories.
Identifies and describes the components of the focusing optics.
Explains the beam path, optical components, and how the PFO functions.
Refers to data sheets and dimensional drawings for technical specifications.
Details the software used for operating the PFO.
Procedures for aligning the optics to the processing plane.
Discusses material absorption and back-reflection issues.
Explains how to use teach modules for alignment and positioning.
Guides on setting working distance with teach modules.
Describes how to adjust the focal position using test weldings.
Instructions for adjusting or removing the crossjet.
Details the teach function, its prerequisites, and auxiliary equipment.
Procedures for adjusting camera picture sharpness and cross-hairs.
Important precautions and general guidelines for maintenance.
Information on wearing parts, cleaning sets, and consumables.
Procedures for cleaning and replacing protective glasses and smoke bells.
Maintenance procedures for the teach module's protective glass.
Steps for cleaning or changing the crossjet.
Procedures for cleaning or replacing MDE nozzles.
Instructions for draining cooling water from the optics.
Guidance on using the emergency stop button.
How to interpret and respond to operational messages.
How to access and use diagnostic pages for troubleshooting.
Information needed when contacting the service department for assistance.
To Next Page
