WATT PPROGRAM
1. After entering the USER information press UP or down to choose the type of program.
2. Press mode to confirm the program type.
3. After choosing the WATTS program, 120, the preset watts setting will blink on the
screen
4. Press UP or DOWN to adjust the watts value. (wattage range 10-350)
5. Press MODE to confirm
6. Press START to begin
HOW TO MAINTAIN YOUR ELLIPTICAL:
Proper maintenance is very important to ensure your Elliptical is always in top working
condition. Improper maintenance could cause damage or shorten the life of your Elliptical and
exceed the LIMITED WARRANTY coverage.
●Important: DO NOT use abrasives or solvents to clean the Elliptical. To prevent damage to
the computer, keep liquids away and keep it out of direct sunlight.
●Inspect and tighten all parts of the Elliptical regularly. Replace any damaged or worn parts
immediately.
LUBRICATION:
Clean pedal arm wheels every month
Clean and lubricate the slider tubes every week using silicone lubricant.
.
To Next Page
Loading...