How to fix computer malfunction on TruPace E 200?
To resolve a computer malfunction on your TruPace Elliptical Trainer, unplug the machine from the power source for 10 seconds, then plug it back in and retest the computer.
What to do if TruPace E 200 computer will not power up?
If your TruPace Elliptical Trainer's computer won't power up: 1. Ensure the power adapter is plugged into the wall outlet. 2. Ensure the power adapter jack is plugged into the unit. 3. Test the wall outlet for power. 4. Test the power adapter for the correct voltage output. 5. Inspect the power adapter and wire for any damage. 6. Check for damaged computer cables; then, reconnect the lower, upper, and console cables as shown on pages 5 and 10 of the assembly section.
Why is there no speed reading on my TruPace Elliptical Trainer?
If you are experiencing no speed reading on your TruPace Elliptical Trainer, check the console and the stage's 9 or 12-PIN connection cable to ensure they are properly connected. Also, verify that the motor distance is within the specified setting range.
What to do if there is no resistance level change on TruPace Elliptical Trainer?
If the resistance level isn't changing on your TruPace Elliptical Trainer: 1. Determine if the motor runs when the resistance level is changed. 2. Inspect the computer cables for damage and reconnect the lower, upper, and console cables as shown on pages 5 and 10 of the assembly section. 3. Retest the resistance.
Why is there no display of speed figure on TruPace E 200?
If the speed figure is not displaying on your TruPace Elliptical Trainer, check the computer cables for damage and reconnect the lower, upper, and console cables as shown on pages 5 and 10 of the assembly section. Also, inspect the speed sensor cable for damage and reconnect it to the lower board. Finally, check the speed sensor and speed sensor magnet for proper positioning.
How to fix noisy movement on TruPace E 200?
If your TruPace Elliptical Trainer is noisy during movement: 1. Check the slider tubes for damage. 2. Clean the slider tubes with liquid silicone. 3. Check the pedal arm wheels for damage. 4. Clean the pedal arm wheels with mild detergent and lubricate with liquid silicone.
What does E-4 mean on TruPace Elliptical Trainer?
If your TruPace Elliptical Trainer displays 'E-4', it indicates that the age, height, or weight values entered exceed the maximum setting range. Re-enter values that do not exceed these maximums.
What does E-1 mean on TruPace E 200 Elliptical Trainer?
If your TruPace Elliptical Trainer displays 'E-1', it means the computer couldn't calculate body fat. Reposition your hands on the pulse grip, ensuring you don't hold one pulse grip with both hands.
Why is the recovery function not working on TruPace E 200?
If the recovery function on your TruPace Elliptical Trainer isn't providing a readout: 1. Make sure the console is in STOP mode and not running a program. 2. Confirm that the pulse readout is working correctly.
What to do if no hand pulse figure displays on TruPace Elliptical Trainer?
If you're not getting a hand pulse figure display on your TruPace Elliptical Trainer: 1. Reposition your hands on the pulse grips, avoiding holding one grip with both hands. 2. Reconnect the pulse grip wire inside the pulse grip handle. 3. Reactivate the computer.
Key technical specifications, including voltage, max weight, and dimensions of the elliptical.
Critical safety precautions to prevent injury, fire, or electric shock during operation of the elliptical.
Attaching front and rear stabilizers to the main frame using specified bolts and washers.
Connecting the handlebar post, computer cables, and securing the post cover.
Attaching the rotation rod and lower handlebars to the handlebar post.
Securing the left and right pedal arms to the crank and slider tubes.
Attaching pedal connecting tubes, stationary, and upper handlebars.
Securely attaching the left and right pedals to the pedal connecting tubes.
Mounting the computer console to the handlebar post and connecting necessary cables.
Guidelines for positioning the elliptical in the home and ensuring a stable, level base.
Instructions for safely mounting, dismounting, and relocating the elliptical equipment.
Explanation of the computer console's display elements, data readouts, and symbols.
Steps to power on the console, set date/time, and configure user profiles for personalized workouts.
Details on using Quick Start, Manual, Preset, User, Heart Rate Control, and Watt programs for training.
Procedures for inspecting, cleaning, and lubricating parts to ensure optimal performance and longevity.
Routine cleaning guidelines to maintain the elliptical and protect its components from damage.
Exercises to warm up and stretch the neck and shoulder muscles before and after workouts.
Stretches targeting the arms and upper thigh muscles for flexibility and injury prevention.
Exercises for inner thighs, hamstrings, knees, calves, and Achilles tendons.
Outlines the warranty period, parts & electronics coverage, and labor reimbursement policy.
Explains the procedure for obtaining warranty service and available remedies for defects.
Lists conditions and circumstances under which the warranty is void or not applicable.
General| Brand | TruPace |
|---|---|
| Model | E 200 |
| Category | Elliptical Trainer |
| Language | English |
To Next Page