25 26
E
Add a trigger by pressing the + button next to triggers.
F
Select a trigger to use to execute an action. (In this example a motion sensor is used as trigger)
G
Choose one of the linked devices
E
F
G
H
Add an action by pressing the + button next to actions.
I
An overview is shown of the available devices that have been linked. Choose an action for the
desired devices. Press the CONFIRM button.
J
The choosen triggers and actions are shown. Press the CONFIRM button again to save the rule.
K
The rule has been added to the rule overview. You can turn the rule ON or OFF by opening or
closing the toggle.
H
J
I
To Next Page
Loading...