30
ICS-2000 INTERNET CONTROL STATION
29
ICS-2000 INTERNET CONTROL STATION
30
ICS-2000 INTERNET CONTROL STATION
29
7 Connect an existing device (Clone)
This step is recommended when you already control your Trust Smart Home receiver with a remote
control or wall switch. (Only for Startline products)
A
Press CLONE
B
A dialogue is shown to clone the signal of the transmitter
C
Give an ON signal on the transmitter that controls the device chosen in step 2.1f.
C
B
A
To Previous Page
Loading...
Need help?
General