Trust OCTOPUS - Edit;Delete Rule; Connectivity; Connect Manually

ICS-2000 INTERNET CONTROL STATION
28
ICS-2000 INTERNET CONTROL STATION
27
L
Press the pencil button the enter edit mode.
M
Press on the rule name to begin editing.
N
When you are done editing the name press the confirm button.
O
To delete a rule press the DELETE button in front of the rule when in editing mode. Press the CONFIRM
button to go back to the rules overview.
5.2 Edit/delete rule
5.2
K
L
O
M
A
When there is no ICS-2000 found, it is possible to enter the MAC address manually during the
registration process. Press the MANUAL button
B
Look at the bottom of the ICS-2000 for the MAC address.
C
Press the “Enter manually” field and enter the MAC address for your ICS-2000. Then press NEXT
6 Connect manually
MAC: 00-00-A2-00-12-11
B
6
A
C