Trust OCTOPUS User Manual

ICS-2000 INTERNET CONTROL STATION ICS-2000 INTERNET CONTROL STATION
15 1615
D
D
The ZigBee Remote is now connected
To control a bulb which is already connected with the Control station it also needs to be connected
to the ZigBee Remote. (Check the manual of the ZigBee remote on how to connect it with a bulb)
Notice: With the ZYCT-202 ZigBee Remote control RGB and Cold/Warm bulbs can only be turned ON
and OFF and can be dimmed.
16
2.4
A
To edit the name of a device first open the room which contains the device.
B
Press the pencil button the enter edit mode.
C
Press on the device name to begin editing.
D
When you are done editing the name press the confirm button.
E
To delete a device press the DELETE button in front of the device when in editing mode. Press the
CONFIRM button to go back to the device overview.
2.4 Edit/delete device
A
B
C
E
D

Trust OCTOPUS Specifications

General

Brand	Trust
Model	OCTOPUS
Category	Controller
Language	English