Trust OCTOPUS User Manual

ICS-2000 INTERNET CONTROL STATION
9 10
ICS-2000 OCTOPUS CONTROL STATION
H
When the receiver is in connect/learn mode press CONNECT.
I
The device is now added to your room. You can now control the device with the App.
J
Use the buttons to control the device.
H
I
J
2.2 Connect a ZigBee bulb
Make sure the ZigBee bulb is close to the Control Station (Within 4 metres)
A
Press on a room name to open it.
B
Press the + button at the top of the screen to add a new device.
C
Enter a name for the device you want to add
D
Press ADD
2.2
A
B
C
D

Trust OCTOPUS Specifications

General

Brand	Trust
Model	OCTOPUS
Category	Controller
Language	English