TruXedo PRO X15 - User Manual

OWNER'S MANUAL
Components In Shipping Box:
A
B
C
E
Passenger Side Rail
Driver Side RailCover Assembly
Main Parts Hardware Bag, Showing Components Inside This Hardware Bag.
Components Inside Hardware Bag "E", p/n 1118547:
Front Driver Bracket
Front Passenger
Bracket
1706274
1706273
Rear Driver/ Passenger
Bracket
(Qty. 2)
Non-Trail Rail Spacer
Bracket, Driver Rear
Non-Trail Rail Spacer
Bracket, Passenger Rear
1706339
1706340
Weather Seal Hardware
Bag
1706275
D
- Please read manual throughly before installing this kit.
Failure to install cover properly will void wrarranty.
- Use picture keys below to verify componets found in shipping
box and hardware bags.
- Damaged or missing parts? Call 1-877-878-9336 Mon - Fri 8 am-5
pm CT. Parts will be shipped to you factory direct. Do not return kit
to place of purchase.
Page 1
P/N 1118548 REV A
Mounting brackets for both Trail Rail and Non-Trail Rail Cargo
Management Systems are located in this hardware bag.
1118538-hardware bag. Fasteners
needed to mount the front brackets
for trucks built BEFORE July 2020.
1118539-hardware bag. Fasteners
needed to mount the rear brackets
for trucks WITH and WITHOUT the
Trail Rail System.
1706041-hardware bag. Fasteners
needed to mount the front brackets
for trucks built AFTER July 2020.
Main Parts Bag
1118547
1118540-hardware bag. Side
Rail Attachment Hardware for
Both Trail Rail and Non-Trail
Rail Truck Boxes.
Truxedo, Inc. 2209 Kellen Gross Drive Yankton, SD 57078 (1-877-878-9336) www.truxedo.com

Summary

Shipping Box Components

Cover Assembly

Identifies the primary cover component found in the shipping box.

Side Rails

Identifies the driver and passenger side rails included in the shipping box.

Weather Seal Hardware Bag

Locates the weather seal hardware bag within the shipping box.

Hardware Bag E Contents

Main Parts Bag and Specific Hardware Bags

Details components within the main hardware bag and other specific hardware bags.

Tools and Important Information

Required Tools

Lists necessary tools for the installation process.

Important Information

Provides crucial notes on cover compatibility and attachment.

Front Weather Seal Installation

Weather Seal Steps

Outlines the initial steps for installing the front weather seal.

Weather Seal Installation Steps

Preparation and Bulkhead Seal

Covers cleaning mounting areas and installing the bulkhead seal.

Foam Blocks and Hole Configuration

Details foam block application and identifying bulkhead hole types.

Front Bracket Hardware

Trucks Built Before July 2020

Details hardware for trucks manufactured before July 2020.

Trucks Built After July 2020

Details hardware for trucks manufactured after July 2020.

Front Bulkhead Assembly Installation

Trucks Built Before July 2020

Procedure for installing front brackets on trucks built before July 2020.

Trucks Built After July 2020

Procedure for installing front brackets on trucks built after July 2020.

Rear Bracket Assemblies

Hardware for Trail Rail Trucks

Details hardware needed for mounting rear brackets on trail rail trucks.

Hardware for Non-Trail Rail Trucks

Details hardware needed for mounting rear brackets on non-trail rail trucks.

Installing Rear Brackets

Non-Trail Rail Truck Installation

Steps for installing rear brackets on non-trail rail truck boxes.

Trail Rail Truck Installation

Steps for installing rear brackets on trail rail truck boxes.

Side Rail Installation Hardware

Hardware Bag 1118540

Lists hardware required for side rail attachment.

Side Rail Components

Driver Side Rail

Identifies the driver side rail component.

Passenger Side Rail

Identifies the passenger side rail component.

Installing Side Rails

Side Rail Mounting Procedure

Details the steps for mounting the side rails to the truck box.

Installing Cover Assembly

Cover Attachment Hardware

Identifies hardware needed to attach the cover assembly to side rails.

Securing Cover Assembly

Details the process of securing the cover assembly to the side rails.

Closing the Cover

Tailgate and Cover Closure

Guides on closing the tailgate and then the cover.

Hook and Loop Fastener Setting

Instructions for setting the hook and loop fasteners for optimal fit.

Opening the Cover

Procedure for safely opening the truck bed cover.

Cover Operation and Tension

Retainer Strap Security

Ensures retainer straps are secured for safety during operation.

Cover Tension Adjustment

Details how to adjust the cover's tension for optimal performance.

Owner Responsibilities and Safety

Safety Instructions

Key safety guidelines for using and maintaining the cover.

Important Operating Tips

Provides essential advice for optimal cover operation and care.

Troubleshooting Common Issues

Header Latch and Side Rail Problems

Addresses common issues with header latches and side rail alignment.

Troubleshooting Continued

Water Leaks and Pooling

Explains causes and solutions for water pooling and leaks.

Cover Care and Maintenance

Cleaning Procedures

Provides instructions for cleaning and maintaining the cover surface.

Lifetime Limited Warranty

TruXedo PRO X15 Specifications

General

Material	Woven fabric
Finish	Matte black
Installation	Clamp-On
Profile	Low profile
Closure Type	Hook and loop
Type	Roll-up
Special Features	Automatic tension control