EasyManua.ls Logo

TruXedo TonneauMate - User Manual

Default Icon
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
P.O. Box 1078, 2209 Kellen Gross Dr., Yankton SD 57078
Phone: 1-877-TRUXEDO (1-877-878-9336) Fax: (605) 664-9304
www.truxedo.com
It is the responsibility of the owner/user to read this manual and comply
with the operating procedures. The owner/user is also responsible
for inspecting the TonneauMate, and for having parts repaired or
replaced when worn or damaged.
Failure to follow safety instructions and warning labels could result in
failure of your TonneauMate and/or personal injury.
Always wear safety glasses and/or other necessary protective
equipment when installing your TonneauMate.
These instructions are complete for most pickup models. Additional
instructions are included, if required for your truck. Please read entire
manual before installing your TonneauMate.
OWNER/USER RESPONSIBILITIES
MESSAGES TO INSTALLER
TonneauMate™
OWNERS MANUAL
P/N 1117442 Rev. F
1. Do not place objects on or against lid or framework.
2. Do not tie cargo to TonneauMate framework.
3. Never allow children or pets to occupy TonneauMate.
4. All mounting fasteners must be securely tightened before
operation.
SAFETY INSTRUCTIONS
TWO YEAR WARRANTY
TruXedo, Inc. warrants that all new, unused products are free
from defects in material and workmanship. This Two Year Limited
Warranty is effective if the product is properly installed and used
for the purpose intended. It applies to the original buyer only.
TruXedo’s obligation under this Warranty is limited to repairing,
or at its option, replacing any part that is returned, transportation
prepaid, to TruXedo, Inc., Yankton, South Dakota, if the product is,
in our judgment, defective. All materials must be accompanied by
an RMA (Returned Material Authorization) number requested by and
authorized in advance of returning the materials. TruXedo, Inc.
shall not be liable or responsible to supply or pay labor to replace
any part found defective, nor shall it be liable for any damages of
any kind or nature to person, product, or property.
There are no Warranties for used products or products that have been
repaired, altered, modied, subjected to misuse, negligence, accident
or ordinary wear and tear. Warranty registration must be on le and/
or proof of original purchase (detailed and dated receipt) required
for warranty to be valid. For warranty registration, see form at the
bottom right of this page.
TruXedo, Inc. products are sold without any express warranty
except as set forth above. TruXedo, Inc. is not obligated to honor
warranty claims if Genuine TruXedo, Inc. parts are not utilized.
TonneauMate can be hand washed with soap and water or cleaned in
a car wash.
TONNEAUMATE MAINTENANCE
TonneauMate is rated for 200 lbs.
TONNEAUMATE LOAD RATING
1/2” & 9/16” Socket
TOOLS REQUIRED
Warranty registration must be on le and/or proof
of original purchase (detailed and dated receipt)
required for warranty to be effective.
Register online at www.truxedo.com
Question and Answer IconNeed help?

Do you have a question about the TruXedo TonneauMate and is the answer not in the manual?

Summary

TonneauMate Warranty and Safety Information

Two Year Limited Warranty Details

Covers product warranty, exclusions, registration, and proof of purchase.

Safety Instructions and User Responsibilities

Outlines safety precautions, user responsibilities, and potential consequences of non-compliance.

Installation Guidance and Maintenance

Provides installer safety messages, necessary tools, maintenance, and load capacity.

TonneauMate Replacement Parts Identification

List of TonneauMate Components

Identifies all replaceable parts with corresponding part numbers for the TonneauMate.

Diagram of Replacement Parts

Visual representation of the TonneauMate components with numbered labels.

Support Arm and Mounting Rail Installation

Support Arm Installation Procedure

Steps for installing support arms into the toolbox channel, noting initial loose fastening.

Mounting Rail Installation Options

Discusses different applications for mounting rails and clamp placement with various covers.

Toolbox and Fastener Installation Steps

Securing Toolbox to Mounting Rail

Details on sliding bolts through the rail and hooking the toolbox, then tightening securely.

Clearance Check and Final Tightening

Instructions to open the lid for clearance and tighten fasteners to prevent side-to-side movement.

TruXedo TonneauMate Specifications

General IconGeneral
BrandTruXedo
ModelTonneauMate
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals