What to do if I have a high voltage issue with TSA PRM-470B Security Sensors?
If a high voltage issue persists in your TSA Security Sensors, even with the correct DC voltage, examine the high voltage board by connecting a high voltage probe to J2-1 on the HHV-454 board.
What to do if the detector is not working in my TSA PRM-470B?
If the detector in your TSA Security Sensors isn't working, remove the three-pin Molex signal connector from the PRCB-001 board and attach an oscilloscope probe to it. If there are no pulses, the detector or voltage divider assembly needs replacing.
How to test front panel switches on TSA PRM-470B Security Sensors?
If the front panel switches on your TSA Security Sensors aren't working correctly, remove the PRCB-001 board and test the switches using an ohmmeter.
General| Brand | TSA |
|---|---|
| Model | PRM-470B |
| Category | Security Sensors |
| Language | English |
To Next Page