TSC MB341T - Page 49

45
◼ After clicking Set button, it'll pop-up the window tip as
below shown.
◼ IP address will be shown in the “IP address” field and the Wi-Fi logo and IP address will be displayed on the LCD control panel.
Note:
IP address should be shown within about 5 to 15 seconds after printer turn on. If not, please refer to steps below to initialize the printer Wi-Fi module settings
then to setup it again.
◼ Remove the cable between the computer and the
printer.
◼ Go to main page, click Add Printer to add the printer via
Network.
◼ Select the printer and enter the setting page by double
clicking the printer.
◼ Click the Print Test Page button to print the test page via
Wi-Fi interface.