To Next Page
R
ramirezjamesSep 10, 2025
What to do if my TSC Printer can’t download files to memory?
- AAndrew ElliottSep 10, 2025
If your TSC Printer is not downloading the file to memory (FLASH / DRAM/CARD), delete any unused files in the memory.
What to do if my TSC Printer can’t download files to memory?
If your TSC Printer is not downloading the file to memory (FLASH / DRAM/CARD), delete any unused files in the memory.
How to improve print quality on a TSC Printer?
If you are experiencing poor print quality with your TSC Printer, consider the following: * Reload the supply. * Clean the print head and platen roller. * Adjust the print density and print speed. * Run a printer self-test and check the print head test pattern for missing dots. * Change to a proper ribbon or label media. * Adjust the printhead pressure adjustment knob. * Ensure the release lever latches the printhead properly.
Why is my TSC Printer not printing anything on the label?
If your TSC Printer is not printing on the label, follow these steps: * Load the media and ribbon according to the instructions. * Verify the ribbon is properly installed with the inked side facing the correct direction. * Calibrate the gap/black mark sensor.
How to fix a paper jam on a TSC MH341?
If your TSC Printer shows a 'Paper Jam' error, try the following: 1. Calibrate the media sensor. 2. Set the correct media size. 3. Remove any stuck labels from inside the printer mechanism.
Why is my TSC MH341 Printer skipping labels when printing?
If your TSC Printer is skipping labels when printing, take these steps: * Check if the label size is set up correctly. * Calibrate the sensor using Auto Gap or Manual Gap options. * Clear the GAP/Black mark sensor with a blower.
How to troubleshoot a TSC Printer when the power indicator is off?
If your TSC Printer's power indicator is not illuminating, please check the following: * Ensure the power cord is properly plugged into both the printer and the outlet. * Make sure the printer is switched on.
Why is the RTC time incorrect on my TSC MH341 after reboot?
To correct an incorrect RTC time after rebooting your TSC Printer, check if there is a battery on the main board.
How to resolve irregular printing on a TSC MH341 Printer?
If your TSC Printer is printing irregularly, you can try: * Turning the printer off and on to skip the dump mode. * Re-setting the Rs-232 setting.
What to do when my TSC MH341 says 'No Ribbon'?
If your TSC Printer indicates 'No Ribbon', you should: * Supply a new ribbon roll. * Reinstall the ribbon, referring to the steps in the user’s manual.
What to do if my TSC MH341 displays 'No Paper'?
If your TSC Printer is displaying 'No Paper', you can: * Supply a new label roll. * Reinstall the label roll, referring to the steps in the user’s manual. * Calibrate the gap/black mark sensor.
Provides critical safety guidelines to follow during printer operation and handling.
Lists the technical specifications and features of the MH241 Series printers.
Provides step-by-step instructions for physically setting up the printer, including placement and connections.
Details the procedure for correctly installing a ribbon onto the printer's supply spindle.
Guides users through the process of loading various types of media rolls into the printer.
Explains the function and adjustment of the print head pressure knobs for optimal print quality.
Details the ribbon tension adjustment knob and its role in achieving good print quality.
Lists common problems encountered during printer operation and provides recovery procedures.
General| Print Speed | 4 ips (101.6 mm/s) |
|---|---|
| Maximum Print Width | 4.09 inches (104 mm) |
| Memory | 128 MB Flash, 128 MB SDRAM |
| Print Technology | Thermal Transfer/Direct Thermal |
| Media Width | 40 - 110 mm |
| Connectivity | USB, Serial, Ethernet |
| Operating System Compatibility | Windows, Linux, Mac OS |
| Max. Print Width | 104 mm |
| Max. Print Length | 1000 mm |
| Processor | 32-bit RISC |
| Interface | USB, Serial, Ethernet |
| Maximum Print Length | 1000 mm |
| Communication Interface | USB, Serial, Ethernet |
| Label Width | 40 - 110 mm |
| Power Supply | 100 - 240 VAC, 50/60 Hz |
| Operating Temperature | 5 - 40°C (41 ~ 104°F) |
| Storage Temperature | -40 ~ 60°C (-40 ~ 140°F) |
| Operating Humidity | 20 - 85% RH (non-condensing) |
| Weight | 2.6 kg (5.73 lbs) |
