- 8 -
2.2.2 Interior view
For MH241 & MH241T Series
1. Ribbon rewind spindle
2. Print head pressure position adjustment knob
3. Print head pressure adjustment knob
4. Print head release lever
5. Ribbon supply spindle
6. Media near end sensor (movable, MH241T Series only)
7. Label roll guard
8. Label supply spindle
9. External label entrance chute
10. Damper
11. Ribbon sensor
12. Platen roller
13. Black mark sensor (shown as↓)
14. Gap sensor (shown as ▽)
15. Front label guide
16. Print head
To Next Page
Loading...
