Need help?Do you have a question about the TSC TE200 series and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Processor | 32-bit RISC CPU |
| Max Print Width | 108 mm |
| Max Print Speed | 6 ips |
| Memory | 8 MB Flash, 8 MB SDRAM |
| Interface | USB 2.0 |
| Max Print Length | 110 inches |
| Media Type | Labels, Tags, Tickets |
| Media Width | 25.4 mm - 112 mm |
| Media Core Diameter | 25.4 mm (1 inch), 76.2 mm (3 inch) |
| Label Length | 0.39 inches to 110 inches |
| Ribbon Width | 33.8 mm ~ 110 mm (1.33" ~ 4.33") |
| Ribbon Core Diameter | 0.5 inches |
| Power | 100-240V AC, 50-60Hz |
| Dimensions | 204 mm (W) x 164 mm (H) x 280 mm (D) |
| Operating Temperature | 5°C to 40°C |
| Storage Temperature | -40°C to 60°C |
| Operating Humidity | 25% to 85% non-condensing |
| Media Thickness | 0.06 ~ 0.19 mm (2.36 ~ 7.48 mil) |
Important warnings and cautions regarding printer operation and handling.
Detailed instructions for correctly loading ribbon into the printer.
Instructions for loading roll labels into the printer correctly.
Steps for calibrating the media sensor using the diagnostic tool.
Guide to common problems, their possible causes, and recovery procedures.
Methods and materials for cleaning printer parts like print head and platen roller.
To Next Page
