Need help?Do you have a question about the TSC PRINTRONIX AUTO ID TC200 Series and is the answer not in the manual?
General| Print Technology | Thermal Transfer / Direct Thermal |
|---|---|
| Resolution | 203 dpi (8 dots/mm) |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Print Speed | 6 IPS (152 mm/s) |
| Max Print Width | 4.09" (104 mm) |
| Connectivity | USB 2.0, RS-232 |
| Media Handling | fan-fold, continuous |
| Media Type | Roll-fed or fan-fold |
| Media Width | 1.0 to 4.64 inches |
| Media Core Diameter | 1 inch (25.4 mm) or 1.5 inches (38.1 mm) |
| Media Max Roll Diameter | 5 inches (127 mm) |
| Ribbon Width | 1.57 inches (40 mm) to 4.33 inches (110 mm) |
| Ribbon Core Diameter | 0.5 inches |
| Ribbon Length | 984 feet (300 meters) |
| Power | 100-240V AC, 50-60 Hz |
| Supported Barcode Types | Data Matrix, QR Code |
Details standard product features for TC200/TC300 and TC210/TC310 models.
Step-by-step guide to initially set up the printer, including connections.
Detailed steps for correctly installing a ribbon into the printer.
Instructions for loading various types of media rolls into the printer.
Guide to launching and setting up the TSC Console software.
Steps to configure the printer's Ethernet connection using TSC Console.
Instructions for setting up Wi-Fi and adding the printer to the console.
Details on setting up printer configurations using the TSPL language.
Details on setting up printer configurations using the ZPL2 language.
Procedures for calibrating the printer's media sensors.
Tools and procedures for diagnosing printer issues.
To Next Page
