TSC PRINTRONIX AUTO ID TC200 Series User Manual

63 pages

To Next Page

To Previous Page

The copyright in this manual, the software and firmware in the printer described are owned by TSC Auto ID Technology Co., Ltd.

CG Triumvirate is a trademark of Agfa Corporation. CG Triumvirate Bold Condensed font is under license from the Monotype

Corporation. Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the property of their respective owners. Information in this document is subject to change without

notice and does not represent a commitment on the part of TSC Auto ID Technology Co. No part of this manual may be

reproduced or transmitted in any form or by any means, for any purpose other than the purchaser’s personal use, without the

expressed written permission of TSC Auto ID Technology Co.

Questions and Answers:

Need help?

Do you have a question about the TSC PRINTRONIX AUTO ID TC200 Series and is the answer not in the manual?

General

Print Technology	Thermal Transfer / Direct Thermal
Resolution	203 dpi (8 dots/mm)
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Print Speed	6 IPS (152 mm/s)
Max Print Width	4.09" (104 mm)
Connectivity	USB 2.0, RS-232
Media Handling	fan-fold, continuous
Media Type	Roll-fed or fan-fold
Media Width	1.0 to 4.64 inches
Media Core Diameter	1 inch (25.4 mm) or 1.5 inches (38.1 mm)
Media Max Roll Diameter	5 inches (127 mm)
Ribbon Width	1.57 inches (40 mm) to 4.33 inches (110 mm)
Ribbon Core Diameter	0.5 inches
Ribbon Length	984 feet (300 meters)
Power	100-240V AC, 50-60 Hz
Supported Barcode Types	Data Matrix, QR Code