TSC TTP-247 Series

Questions and Answers:

D
drogersAug 2, 2025
What to do if my TSC TTP-247 is not printing?
- L
  Lori Green DDSAug 2, 2025
  If your TSC printer isn't printing, make sure the interface cable is securely connected. If you're using a serial port, ensure the cable is pin-to-pin connected, and the serial port settings are consistent between your computer and the printer. In the Windows driver, verify that the correct printer port is selected. Lastly, if you're using Ethernet, check that the IP address, subnet mask, and gateway are configured correctly. Reconnect the cable to the interface. Replace the cable with one that is pin-to-pin connected. Reset the serial port setting. Select the correct printer port in the driver. Configure the IP, subnet mask, and gateway.
R
Richard AndersonAug 6, 2025
How to fix poor print quality on a TSC TTP-247?
- D
  David HobbsAug 6, 2025
  To resolve poor print quality on your TSC printer: * Ensure the top cover is completely closed and latched properly on both sides. * Verify that the power supply provides 24V DC output. * Reload the supply correctly. * Clean the print head to remove any dust or adhesive buildup.
D
Danielle WoodAug 10, 2025
What to do if my TSC TTP-247 has a paper jam?
- R
  Ryan MorganAug 10, 2025
  If your TSC printer is experiencing paper jams: 1. Calibrate the gap/black mark sensor. This ensures the printer correctly detects the label spacing. 2. Set the label size accurately in your labeling software or program to match the installed paper. 3. Check the printer mechanism near the sensor area for any stuck labels and remove them.
K
Kyle MackAug 15, 2025
Why is my TSC TTP-247 Printer not responding?
- R
  Ryan JonesAug 15, 2025
  If your TSC printer is not responding, first, ensure the power switch is turned on. Check if the green LED is lit on the power supply; if not, the power supply may be broken. Also, verify that both power connections, from the power cord to the power supply and from the power supply to the printer, are securely connected.
J
Jill LewisAug 19, 2025
What to do if TSC Printer is continuously feeding labels?
- P
  parkerrobertAug 19, 2025
  If your TSC printer is continuously feeding labels, the printer settings may be incorrect. Please initialize the printer and perform gap/black mark calibration.
K
Kevin WalkerAug 25, 2025
What to do if my TSC TTP-247 Printer is paused?
- N
  nharperAug 25, 2025
  If your TSC printer is paused, press the FEED button to resume printing.
V
Vicki HowellAug 28, 2025
How to check print head test pattern on TSC Printer?
- M
  Michael WadeAug 28, 2025
  Run a printer self-test and check the print head test pattern for any missing dots, which would indicate a damaged head element.

TSC TTP-247 Series Specifications

General

Resolution	203 dpi
Max Print Width	4.09" (104 mm)
Processor	32-bit RISC CPU
Operating Temperature	41°F to 104°F (5°C to 40°C)
Print Method	Thermal Transfer and Direct Thermal
Max Print Speed	7 ips
Memory	8 MB SDRAM
Interface	USB 2.0
Ribbon Capacity	300 meters
Media Sensor	Reflective, Transmissive
Label Width	1" (25.4 mm) ~ 4.33" (110 mm)
Label Thickness	0.0028" to 0.008" (0.07 mm to 0.2 mm)
Power Supply	100-240V AC, 50/60 Hz
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	25 ~ 85% non-condensing
Maximum Print Length	39.37" (1000 mm)