TSC TE200 series User Manual

12
4. Push the print head release button to
open the print head mechanism.
5. Insert the ribbon to the ribbon
spindle.
Note: The ribbon spindle can be
substituted by insert the ribbon
with notches on both sides to the
ribbon mechanism directly.
6. Insert the right side of ribbon supply
spindle to the ribbon supply hub first.
Then, insert the left side of ribbon
supply spindle to the hole at the left
side of ribbon mechanism.
OPEN

TSC TE200 series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Processor	32-bit RISC CPU
Max Print Width	108 mm
Max Print Speed	6 ips
Memory	8 MB Flash, 8 MB SDRAM
Interface	USB 2.0
Max Print Length	110 inches
Media Type	Labels, Tags, Tickets
Media Width	25.4 mm - 112 mm
Media Core Diameter	25.4 mm (1 inch), 76.2 mm (3 inch)
Label Length	0.39 inches to 110 inches
Ribbon Width	33.8 mm ~ 110 mm (1.33" ~ 4.33")
Ribbon Core Diameter	0.5 inches
Power	100-240V AC, 50-60Hz
Dimensions	204 mm (W) x 164 mm (H) x 280 mm (D)
Operating Temperature	5°C to 40°C
Storage Temperature	-40°C to 60°C
Operating Humidity	25% to 85% non-condensing
Media Thickness	0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)