TSC MH341 Series User Manual

27
3.4.4 Loading Media in Rewind Mode (Option for MH241P Series)
1. Open the printer right side cover.
2. Please refer to section 3.4.1 for loading
media.
3. Using the front display panel to do the
calibration and set the printer mode to
rewind mode.
4. Open the printer lower cover, then push
the label guide to the far right side and pull
it down.
PUSH

TSC MH341 Series Specifications

General

Brand	TSC
Model	MH341 Series
Category	Printer
Language	English